Name: Plan 2387JD: Luxury Master Suite with Sitting Room & Fireplace
SKU: 2387JD
Price: 3100.0 USD
Availability: InStock

VIEW ALL

Plan 2387JD

Luxury Master Suite with Sitting Room & Fireplace

Heated S.F.

5,250

Beds

5

Baths

4.5

Stories

2

Cars

3

Floor Plan

Main Level

2nd Floor

Plan Details

A fantastic porch with sturdy columns wraps around the front left corner of this extravagant Craftsman home plan. A covered patio in back gives you a second location to enjoy the fresh air and the views.
The foyer is roomy and opens to the living room which in turn is open to the dining room. There, you'll find a wall of built-ins and access to the kitchen via a butler's pantry.
The kitchen is spacious and has views to the nook and to the familiy room with fireplace.
All the bedrooms are upstairs. And a large bonus room - included in the total living area calculations - is over the garage. Finish it later and end up with the same home but less heated area.
The roof has an 8:12 pitch and is a truss design.
BONUS: See a our Facebook photo album for more views.
Related Plans: Get a basement with house plan 23216JD and gain 1,340 sq. ft. in additional living space.
Get a master-down with house plan 23298JD.
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.

What's Included

Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.

What's Not Included

Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

PRINT DETAILS

Square Footage Breakdown

Total Heated Area:

5,250 sq. ft.

1st Floor:

2,750 sq. ft.

2nd Floor:

2,500 sq. ft.

Bonus:

351 sq. ft.

Beds/Baths

Bedrooms:

5

Full bathrooms:

4

Half bathrooms:

1

Foundation Type

Standard Foundations:

Crawl

Need A Different Foundation?

Request A Modification Quote

Exterior Walls

Standard Type(s):

2x6

Dimensions

Width:

98' 0"

Depth:

74' 0"

Max Ridge Height:

34' 6"

Garage

Type:

Attached

Area:

1060 sq. ft.

Count:

3 Cars

Entry Location:

Side

Ceiling Heights

First Floor

9'

Second Floor

9'

Roof Details

Primary Pitch:

8 on 12

Framing Type:

Truss

Architectural Style

Special Features

Butler Walk-in Pantry

Jack & Jill Bath

Laundry - Main Level

Master Suite - 2nd Floor

Master Suite - Sitting Area

Plan Collections

* Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping! Let's go back to the top.