Name: Plan 65663BS: 4-Bed Florida House Plan with Study and Large Covered Porch
SKU: 65663BS
Price: 3033.0 USD
Availability: InStock

Plan 65663BS

4-Bed Florida House Plan with Study and Large Covered Porch

Heated S.F.

3,033

Beds

Baths

3.5

Stories

Cars

Floor Plan

Main Level

Plan Details

A blend of siding materials join forces to create this 4-bedroom, Florida house plan, while the 3-car garage extends from the front of the home to create a parking courtyard in front of the formal entrance.
From the foyer, french doors to the left lead to a quiet study. A few steps further and past the formal dining room, you will find an open and airy great room that flows into the kitchen.
A 4-panel glass door retracts to extend the living space onto the back porch, perfect for entertaining.
The master suite is located towards the rear of the design and includes a 5-fixture ensuite and two walk-in closets.
Three additional bedrooms complete the layout; two share a Jack-and-Jill bath, and one neighbors a full bath.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.