Related Plans: For other garage options, see house plan 23109JD (2-car) and 23110JD (4-car tandem).
Go smaller with house plan 23404JD (2,380 sq. ft.).
Get more room with house plans 23353JD (4,379 sq. ft.) and 2376JD (4,120 sq. ft.).
NOTE: Additional fees apply when building in the State of Washington. Contact us for more information.
What's Included
Cover Sheet - The cover sheet includes the general notes and building code information, design standards and structural materials specifications required to construct your home.
Schedule Sheet - The schedule sheet includes the roof and foundation ventilation schedules, insulation and vapor barrier specifications, and exhaust fan ventilation schedule.
Detail Sheet - The detail sheet shows building components at large scale as required to explain construction of footings, foundation walls, concrete slabs, framed floors and walls, posts, beams, insulation, eaves, roofs, vents, stairs, skylights, and connections.
Foundation Plan Sheet - The foundation plan sheet shows the layout of the crawl space, walk-out basement or slab foundation. The foundation plan includes all necessary notes, dimensions, concrete walls, footing pads, posts, beams, bearing walls, crawlspace vents, footing schedule, steel reinforcing, and structural information. If you require a different foundation type, please contact us for modifications to your plan.
Floor Plan Sheet - Floor plans are horizontal cuts through each floor level of the home, usually at 5' above the floor. The floor plan shows the location of interior and exterior walls, doors, windows, stairs, closets, cabinets, flooring, appliances, plumbing fixtures, fireplaces, posts and beams. Floor plans also indicate vaulted, coffered, or box beam ceilings, cased openings and areas with ceiling soffits.
Roof Framing Plan Sheet - The roof framing plan shows the geometry of the hips, ridges, valleys, dormers, roof pitches, wall and plate heights, and overhangs. The plan also shows all individual roof framing members, trusses, rafters, beams, skylights, roof vents, gutters, downspouts, skylights, bearing walls under framing members, and point loads.
Elevation Sheet - Exterior elevations show all four sides of the house, describing the roofing, siding, and trim materials, doors, windows, roof pitches, skylights, gutters, chimneys, wall heights, finish grade and overall building height.
Building Section Sheet - Building sections are vertical cuts through the house from the roof to the foundation. The sections illustrate the construction sequence from bottom to top starting with excavation, proceeding up through the foundation, drainage, wall and floor framing, stair framing, roof framing, windows, doors, venting, and exterior and interior finishes. Wall plate heights for each floor are also delineated.
What's Not Included
Electrical Plan - handled by your subcontractor to match your individual needs
Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required
*
Please note that all sale prices and promotions featured on our website are subject to change without prior notice. While we strive to provide accurate and up-to-date information, occasional discrepancies may occur due to factors beyond our control. We encourage you to verify all details, including pricing and availability, before making any purchase. Exclusions or restrictions may apply to specific promotions. We reserve the right to modify or cancel any sale at our discretion. Thank you for your understanding and happy shopping!
Let's go back to the top.
Not all items qualify for discounts. Discounts are only applied to plans, not to Cost-to-Build Reports, plan options and optional foundations and some of our designers don't allow us to discount their plans.
×
Please note the following
Your Materials List will match the base plan only. The following options will not be reflected on the materials list:
Open Floor Plan with Garage Options
3,155
Heated s.f.
4
Beds
3.5
Baths
2
Floors
3
Car garage
Floor Plan
Main Level
Second Level
Lower Level
Plan Details
Square Footage Breakdown
Total:
3,155 sq. ft.
Lower Level:312 sq. ft.
1st Floor:1,583 sq. ft.
2nd Floor:1,260 sq. ft.
Dimensions
Width:63' 0"
Depth:46' 0"
Max ridge height:27' 10"
Beds/Baths
Bedrooms:
4
Full bathrooms:3
Half bathrooms:1
Garage
Type:Drive Under
Area:760 sq. ft.
Count:3 Cars
Entry Location:Front
Foundation Type
Standard Foundations:Crawl
Exterior Walls
Standard Type(s):2x6
Ceiling Heights
Floor / Height:
Lower Level /
8' 0"
First Floor /
9' 0"
Second Floor /
8' 0"
Are you sure you want to remove this plan from your favorites?
It will be removed from all of your collections.
Price Match Guarantee
If you've found a better price, call us at 1-800-854-7852 or email us at [email protected] with the plan number, price, and where you found it for less. We will match that price and give you an additional 10% discount.
*Our Price Guarantee is limited to house plan purchases within 10 business days of your original purchase date.
×
Block / CMU (main floor)
Most concrete block (CMU) homes have 2 x 4 or 2 x 6 exterior walls on the 2nd story.