Name: Plan 444161GDN: 3-Bed Traditional House Plan with Cathedral Ceiling and Bonus Room
SKU: 444161GDN
Price: 1525.0 USD
Availability: InStock

Plan 444161GDN

3-Bed Traditional House Plan with Cathedral Ceiling and Bonus Room

Heated S.F.

1,729

Beds

2 - 3

Baths

Stories

Cars

Floor Plan

Main Level

Bonus Room

Basement Stair Location

Plan Details

This Traditional-style house plan showcases two stately columns which lead to the front door. Shutters and arches with keystones frame half-circle transoms, while low-maintenance siding and the front-entry garage add convenience. A 6'4"-deep front porch completes the pretty picture.
The foyer's tray ceiling creates an elegant entrance, that takes you to the flexible study/bedroom, a secondary bedroom, and the great room.
A fireplace, an 18'4" cathedral ceiling, and french doors highlight the great room, which seamlessly flows into the kitchen and dining areas. French doors provide access to the perfect grilling porch.
Closet/storage space fills every nook: under the bonus room stairs, in the utility room, and near every bedroom.
Located in the quiet zone of the house plan, the master bedroom - with its 13'8" cathedral ceiling - is designed to pamper.
Stairs take you to a 404 square foot bonus room (not included in the total square footage) that awaits your expansion plans.

What's Included

Cover Sheet - An artist's rendering of the exterior of the house shows you approximately how the house will look when built and landscaped
Foundation Plan - This plan gives the foundation layout, including support walls, excavated and unexcavated areas, if any, foundation notes and details, and floor framing.
Detailed Floor Plans - These plans show the layout of each floor of the house. Rooms and interior spaces are carefully dimensioned and keys are given for cross-section details provided later in the plans, as well as window and door schedules. These plans may also show the location of kitchen appliances and plumbing fixtures, and may suggest locations for electrical fixtures, switches and outlets.
Interior Elevations - The interior elevation drawings show a suggested layout design of cabinets, utility rooms, fireplaces, bookcases, built-in units and other special interior features depending on the nature and complexity of the item.
Roof Plan - The roof plan shows a bird's eye view of the overall layout of the roof, ridges, valleys, and slopes.
Exterior Elevations - Included are front, rear, left and right sides of the house. Exterior materials, details and measurements are also given.
Cross-Section / Wall Section Details - Important changes in floor, ceiling and roof heights or the relationship of one level to another are called out. Also shown, when applicable, are exterior details such as railing and banding.
Structural Plan - Overall layout and necessary details for the ceiling, second-floor framing (if applicable) and roof construction. If trusses are used, it's suggested that you use a local truss manufacturer to design your trusses to comply with your local codes and regulations.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required