Name: Plan 65652BS: 3-Story Southern Home Plan with Loads of Outdoor Living Space - 3700 Sq Ft
SKU: 65652BS
Price: 2960.0 USD
Availability: InStock

Plan 65652BS

3-Story Southern Home Plan with Loads of Outdoor Living Space - 3700 Sq Ft

Heated S.F.

3,700

Beds

Baths

4.5

Stories

Cars

Floor Plan

Main Level

2nd Floor

Lower Level

Plan Details

This 3-story, Southern home plan was designed with outdoor living in mind. The spacious rear porch includes a built-in grill and pool bath, ideal for entertaining.
Move easily between the great room, topped by exposed beams, and the kitchen, which presents an oversized island, walk-in pantry, and adjacent dining area.
The master bedroom offers the homeowner access to the porch, along with two walk-in closets bordering the hallway to the luxury ensuite. A second bedroom and study complete the main level.
Take the stairs or elevator up to find bedrooms 3 and 4 on either side of a recreation room; each room offers access to a covered balcony.
Discover the double garage on the lower level, with easy access to the elevator or foyer, where the stairs can be found.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.