Name: Plan 65703BS: 4-Bed Contemporary Southern Home Plan with Bonus Room
SKU: 65703BS
Price: 3003.2 USD
Availability: InStock

Plan 65703BS

4-Bed Contemporary Southern Home Plan with Bonus Room

Heated S.F.

3,754

Beds

Baths

Stories

Cars

Floor Plan

Main Level

Plan Details

A low-pitched roof caps this 4-bedroom Contemporary Southern home plan, which presents an open living space that seamlessly flows onto the covered lanai.
The foyer is bordered by a formal dining room and quiet study, while the heart of the home allows you to easily move between the kitchen, breakfast nook, and great room.
Discover the master suite privately tucked into the rear corner, with access to the lanai, two walk-in closets, and a 5-fixture ensuite.
Three family bedrooms line the left side of the of the design; two include a full bath, and one shares the hallway bathroom.
The sizable bonus room is fun for the whole family and includes an optional wet bar.
Related Plan: Get a 5 bed version with house plan 65702BS.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.