Name: Plan 65655BS: 5-Bed Transitional Florida Home Plan for Indoor Outdoor Lifestyle
SKU: 65655BS
Price: 2879.2 USD
Availability: InStock

Plan 65655BS

5-Bed Transitional Florida Home Plan for Indoor Outdoor Lifestyle

Heated S.F.

3,599

Beds

Baths

Stories

Cars

Floor Plan

Main Level

2nd Floor

Plan Details

Enjoy indoor outdoor living with this 5-bedroom, Transitional Florida home plan, which boasts an open concept living space that seamlessly flows onto the outdoor living area through retractable glass-panel doors.
The gourmet kitchen features a sizable work island, walk-in pantry, and adjacent dining area to meet all of your entertaining needs.
The homeowner will appreciate the deluxe master suite, which boasts a freestanding tub in the 5-fixture ensuite and two walk-in closets. A study is located next door.
Three bedrooms lines the left side of the design with a pool bath providing access to the backyard at the rear.
Enter from the 3-car garage to find the laundry room and a staircase that leads to bedroom 5, complete with a full bath.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.