Name: Plan 65653BS: Coastal Contemporary House Plan with Front and Back Balconies - 3741 Sq Ft
SKU: 65653BS
Price: 3741.0 USD
Availability: InStock

Plan 65653BS

Coastal Contemporary House Plan with Front and Back Balconies - 3741 Sq Ft

Heated S.F.

3,741

Beds

4 - 5

Baths

4.5+

Stories

Cars

Floor Plan

Main Level/Ground Level

2nd Floor

3rd Floor

Rooftop Deck

Plan Details

This Coastal Contemporary house plan offers a fresh twist to the traditional coastal designs. The lower level is where you'll find two garage bays, along with space for cart storage.
Use the elevator or stairs to easily move between floors, and discover the heart of the home on the main level with a retractable rear wall that creates an indoor outdoor living experience.
Two bedrooms are located on the main level; each includes a forward-facing balcony, and one includes a full bath.
The master bedroom can be found upstairs, paired with a pass-through bathroom that provides a shortcut to the laundry room. French doors open to a rear balcony with a spiral staircase to the patio below.
Across the hall from the master, bedrooms 3 and 4 reside, each with access to a full bath.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.