Name: Plan 65711BS: Coastal Mediterranean Home Plan for Indoor Outdoor Lifestyle
SKU: 65711BS
Price: 3391.2 USD
Availability: InStock

Plan 65711BS

Coastal Mediterranean Home Plan for Indoor Outdoor Lifestyle

Heated S.F.

4,239

Beds

Baths

5.5

Stories

Cars

Floor Plan

Main Level

Plan Details

Move easily between the family room and covered lanai with this Coastal Mediterranean home plan.
Coffered ceilings throughout the home offer an elegant and appealing feature, while the sizable gathering spaces encourage you to entertain friends and family.
The gourmet kitchen boasts two islands and overlooks the octagonal family room, which is drenched in natural lighting.
The master suite shares the right side of the design with a quiet study, and includes a sitting nook, dual closets, and a deluxe ensuite with an oversized shower.
Enter from the 3-car garage to find the laundry room to the left, and a hallway that leads to three family bedrooms, each with its own full bath.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.