Name: Plan 444157GDN: Craftsman Home Plan with Angled Family Room and Master Bedroom
SKU: 444157GDN
Price: 1925.0 USD
Availability: InStock

Plan 444157GDN

Craftsman Home Plan with Angled Family Room and Master Bedroom

Heated S.F.

3,647

Beds

Baths

3.5

Stories

Cars

Floor Plan

Main Level

2nd Floor

Basement Stair Location

Plan Details

This Craftsman home plan has a rustic exterior with stone covering most of the exterior and wood in the gables. Columns frame the barrel-vault entrance and a metal shed roof extends over the 50' wide and 6' deep front porch.
The two-story foyer grants views of the study, dining room, vaulted living room (19'1" max ceiling height) and balcony, while ceiling treatments, built-ins, fireplaces and a walk-in-pantry add elegance.
The family room has a cathedral ceiling and comes off the home at an angle. A fireplace and porch access are two nice touches. Across the home, the master suite also comes off at an angle and has a fireplace and porch access, too.
A study off the foyer can be used as a home office and has views to the front.
Upstairs, two bedrooms each have their own bathrooms and there is bonus expansion over the garage.

What's Included

Cover Sheet - An artist's rendering of the exterior of the house shows you approximately how the house will look when built and landscaped
Foundation Plan - This plan gives the foundation layout, including support walls, excavated and unexcavated areas, if any, foundation notes and details, and floor framing.
Detailed Floor Plans - These plans show the layout of each floor of the house. Rooms and interior spaces are carefully dimensioned and keys are given for cross-section details provided later in the plans, as well as window and door schedules. These plans may also show the location of kitchen appliances and plumbing fixtures, and may suggest locations for electrical fixtures, switches and outlets.
Interior Elevations - The interior elevation drawings show a suggested layout design of cabinets, utility rooms, fireplaces, bookcases, built-in units and other special interior features depending on the nature and complexity of the item.
Roof Plan - The roof plan shows a bird's eye view of the overall layout of the roof, ridges, valleys, and slopes.
Exterior Elevations - Included are front, rear, left and right sides of the house. Exterior materials, details and measurements are also given.
Cross-Section / Wall Section Details - Important changes in floor, ceiling and roof heights or the relationship of one level to another are called out. Also shown, when applicable, are exterior details such as railing and banding.
Structural Plan - Overall layout and necessary details for the ceiling, second-floor framing (if applicable) and roof construction. If trusses are used, it's suggested that you use a local truss manufacturer to design your trusses to comply with your local codes and regulations.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required