Plan 801139PM: Duplex House Plan with Matching 2364 Square Foot Units with Finished Lower Levels

Plan 801139PM

Duplex House Plan with Matching 2364 Square Foot Units with Finished Lower Levels

Heated S.F.

4,728

Units

Width

Depth

Floor Plan

Main Level

Lower Level

Plan Details

This multi-family house plan gives you 2 number of units each with 2364 square feet of heated living space (1182 sq. ft. on the first floor, 1182 sq. ft. on the lower level), 4 beds and 2 baths.
The basement has two bedrooms, a complete bathroom, a family room and an area for an office or a reading corner.
The ground floor has a vestibule with a walk-in closet, a kitchen with a walk-in pantry, a dining room, a living room, a complete bathroom as well as two other bedrooms, one of which being the master bedroom with a walk-in closet.
NOTE: Please allow up to 20 business days for delivery.

Unit A

2,364Sq. Ft.

1182 Sq. Ft.

Lower Level

1182 Sq. Ft.

1st Floor

4Beds

2Full Baths

30'width

40'depth

26' 7"height

Unit B

2,364Sq. Ft.

2364 Sq. Ft.

Lower Level

2364 Sq. Ft.

1st Floor

4Beds

2Full Baths

30'width

40'depth

26' 7"height

What's Included

Please note this plan is designed to the National Building Code of Canada.

Exterior Elevations – Four detailed exterior elevations views showing the final appearance of each side of the house.
Foundation Plans – Different isometric views with dimensions as well as relevant information to build the foundation.
Floor Plans – A drawing of each floor of the house. They are fully dimensioned showing the size of rooms and the location and size of windows, doors and staircases.
Cross-Section View – Vertical section of the house showing the structure, insulation, typical wall configuration as well as other details
The plans include the 4 elevations views, foundation plans, floor plans, cross section, staircase section, materials specifications and various construction details which aid in the house's construction.
The plan views, cross sections and front elevations are drawn to the scale of 1/4" = 1'-0"; the side and rear elevations are 1/8" = 1'-0" and some details are 1/2" = 1'-0".
Lintel, beam, post, footing sizes, etc. are calculated (may require local architect/ engineer stamp) and the plans are available in metric.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required