Plan 65714BS: Mediterranean-style Florida Home Plan with Large Covered Lanai

Plan 65714BS

Mediterranean-style Florida Home Plan with Large Covered Lanai

Heated S.F.

4,089

Beds

Baths

4.5

Stories

Cars

Floor Plan

Main Level

Plan Details

Large gathering spaces make entertaining a breeze in this Mediterranean-style Florida home plan. The rear walls nearly fully retract for a true indoor outdoor living experience.
The formal living room features a grand fireplace and a nearby wet bar, while the gourmet kitchen is overly spacious and features a prep island with a bar sink, a walk-in pantry, and six-burner range.
The right side of the design is occupied by the deluxe master suite and neighboring study, both with elegant ceilings and ornate finishes.
Three bedroom suites complete the layout, while a pool bath attached to the rear of the home helps when hosting fun in the sun for friends and family.
Enter from the 3-car garage to find a coat closet across from the laundry room, and a nearby powder bath.
Related Plans: Get a courtyard-entry garage with house plan 65739BS. Get a porte-cochere with house plan 65752BS.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.