Name: Plan 16836WG: Mediterranean Villa
SKU: 16836WG
Price: 1795.0 USD
Availability: InStock

Plan 16836WG

Mediterranean Villa

Heated S.F.

5,202

Beds

Baths

Stories

Cars

Floor Plan

Main Level

2nd Floor

Plan Details

All the charm of the Mediterranean is reflected on the exterior of this grand villa home plan.
The circular staircase off the two-story foyer will catch your eye immediately upon entering.
Both the family room and formal living room share a large wet bar that is perfect for entertaining.
The island in the kitchen is open to the family room allowing for wonderful views.
Off to the rear, the master suite focuses on luxury with its tray ceiling, access to the rear lanai and a very special master bath.
On the second floor, the hall is open on both sides to take advantage of views of both the foyer and family room.
Everyone will love the huge game room with plenty of room for a pool table or media center.

What's Included

Floor Plans – ¼”=1’-0” scale floor plan indicating location of frame and masonry walls, support members, doors, windows, plumbing fixtures, cabinets, shelving, ceiling conditions and notes deemed relevant to this plan.
Exterior Elevations – All elevations at ¼” = 1’-0” scale in most cases. Some older designs may contain 1/8” scale side and rear elevations. Drawing will indicate overall configuration of home at each side view and make note of plate heights, roof overhangs, window header heights, roof pitches, materials used and extent to which they are used and enlargement of any details we feel necessary to explain the construction.
Building Sections – ¼” = 1’-0” building sections are included when there is no other reasonable way to indicate the volumetric/height conditions in the home. Most of this information can usually be determined from the exterior elevations.
Cabinet Elevations – 3/8” = 1’-0” scale elevations indicating configuration of cabinets, heights, widths, type of components used, cabinet material and finish, counter surfaces, appliances,
Framing Plans – ¼” – 1’-0” scale framing plans indicating size and spacing of members as well as bracing and blocking required for structural purposes. Local codes will most likely need to be consulted.
Foundation Plans – ¼” = 1’-0” scale foundation plans indicating location of structural walls, grade beams, reinforcing steel and structural columns. Consulting a local engineer is advisable as well as is analysis of soil conditions on site.
Electrical Plans – ¼” = 1’-0” scale schematic plans indicating location and types of electrical fixtures, switches, outlets, and how they are to be switched. Plans do not include circuiting or wire sizing. Plans will also include specialty items such as hose bibs, gas connections, location of a/c equipment, return air vents or other mechanical/electrical/plumbing items which need to be located.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required