Name: Plan 65709BS: One-level Coastal Home Plan with European Influence and Bonus Room
SKU: 65709BS
Price: 4184.0 USD
Availability: InStock

Plan 65709BS

One-level Coastal Home Plan with European Influence and Bonus Room

Heated S.F.

4,184

Beds

3 - 5

Baths

5.5

Stories

Cars

Floor Plan

Main Level

Plan Details

This one-level, coastal home plan with European influences delivers an open floor plan, large outdoor living area, and a bonus room.
A coffered ceiling rests above the great room, where a 4-panel glass door connects with the covered lanai and provides the indoor outdoor living experience.
The oversized kitchen island provides plenty of meal prep space and the adjoining dining area is filled with natural lighting.
The master suite is privately situated along the right side of the design, next to a quiet study, and boasts a sitting area, two walk-in closets, and a luxurious ensuite.
Three additional bedroom suites are in line with the double garage, while a fifth bedroom suite is accessible from the lanai and serves as a flexible bonus space.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.