Name: Plan 65647BS: Southern Coastal Home Plan with Elevator and Split Bedrooms
SKU: 65647BS
Price: 4853.0 USD
Availability: InStock

Plan 65647BS

Southern Coastal Home Plan with Elevator and Split Bedrooms

Heated S.F.

4,853

Beds

Baths

5.5

Stories

Cars

Floor Plan

Main Level

2nd Floor

Third Level Deck

Lower Level

Plan Details

The foyer of this Southern Coastal home plan is situated between two tandem garages on the lower level, while the heart of the home is located on the main level and extends outdoors onto a spacious covered lanai.
The great room features a tray ceiling and multi-panel door to allow fresh air to flow freely into the space. The kitchen sink is located in the island that overlooks the dining area, and a corner pantry maximizes storage space.
A quiet den provides a relaxing space to recharge, and sits next to the laundry room.
Enjoy the privacy offered by the master suite that includes two walk-in closets and an oversized shower in the 5-fixture bathroom.
Four bedroom suites reside in each corner of the second level, along with a recreation room with a wet bar and access to a rear balcony.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.