Name: Plan 65717BS: Split-Bed Mediterranean Home Plan with Open Living Space and 2-Car Garage
SKU: 65717BS
Price: 3268.0 USD
Availability: InStock

Plan 65717BS

Split-Bed Mediterranean Home Plan with Open Living Space and 2-Car Garage

Heated S.F.

3,268

Beds

Baths

3.5

Stories

Cars

Floor Plan

Main Level

Plan Details

The heart of this split-bedroom, Mediterranean house plan is oriented to take advantage of the rear outdoor living space through oversized glass-paneled doors.
The gourmet kitchen hosts many luxury amenities, including a large island with casual seating, walk-in pantry, and 6-burner range. The adjoining dining room is filled with natural light and overlooks the covered lanai.
Set apart from the secondary bedrooms, discover the master suite with dual walk-in closets and a 5-fixture bathroom with a generously-sized shower. The neighboring study rests behind french doors.
Two additional bedroom suites are located behind the 2-car garage, each with a walk-in closet and full bath.
A powder bath near the garage entrance is helpful when trying to leave in a hurry, and the laundry room can easily accommodate active families.
Related Plan: Get a 3-car garage with house plans 65680BS and 65631BS.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.