Name: Plan 65741BS: Transitional Contemporary with 3 Beds and Large Covered Lanai - 2316 Sq Ft
SKU: 65741BS
Price: 2316.0 USD
Availability: InStock

Plan 65741BS

Transitional Contemporary with 3 Beds and Large Covered Lanai - 2316 Sq Ft

Heated S.F.

2,316

Beds

Baths

Stories

Cars

Floor Plan

Main Level

Plan Details

A grand front entry sits in the center of this one-level, Transitional Contemporary Beach house plan, clad in stucco and enhanced by exposed rafters and wooden brackets.
Inside, the foyer merges with the garage entry, both leading into a generous great room, framed by a tray ceiling. A 3-panel sliding door encourages you to spend time on the covered outdoor living space.
Entertaining is a delight with this kitchen, which delivers a large island and spacious walk-in pantry. The adjoining dining room overlooks the backyard and offers an optional wet bar.
The master suite solely takes up the left side of the home, and includes a freestanding tub in the ensuite and two walk-in closets.
Bedrooms 2 and 3 reside behind the double garage, and a quiet study provides a space to read, relax, or work from home.
Related Plan: Get an alternate exterior with house plan 65677BS.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.