Name: Plan 65699BS: Transitional Florida Home Plan with 4-Car Garage and Split-bed Layout
SKU: 65699BS
Price: 2822.4 USD
Availability: InStock

Plan 65699BS

Transitional Florida Home Plan with 4-Car Garage and Split-bed Layout

Heated S.F.

3,528

Beds

Baths

3.5

Stories

Cars

Floor Plan

Main Level

Plan Details

This Transitional Florida home plan connects the open interior with the expansive covered lanai, complete with a built-in summer kitchen.
An elegant coffered ceiling rests above the light and airy great room, while the kitchen hosts a central island, large range, and nearby walk-in pantry.
The master bedroom occupies the right side of the home and features a multi-panel glass door to the back lanai, a walk-in closet, and a deluxe ensuite with a freestanding tub in the two-person shower.
Bedrooms 2 and 3 share a Jack-and-Jill bath, and the flexible bonus room connects with the lanai and includes a pool bath.
The 4-car garage protrudes from the front of the home, creating a parking courtyard for family and guests.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.