Name: Plan 65700BS: Transitional House Plan with Study and 3-Car Garage - 2511 Sq Ft
SKU: 65700BS
Price: 2008.8 USD
Availability: InStock

Plan 65700BS

Transitional House Plan with Study and 3-Car Garage - 2511 Sq Ft

Heated S.F.

2,511

Beds

Baths

Stories

Cars

Floor Plan

Main Level

Plan Details

With the 3-car garage extending from the front of this Transitional house plan, a parking courtyard brings you to the grand front entrance.
The shared areas feature 13' tray ceilings, which helps to define the living spaces. An oversized sliding door creates a seamless flow between the great room and outdoor living space, while the open kitchen reinvigorates your love of cooking and entertaining.
For privacy, the master suite solely occupies the right side of the design, and is paired with a 5-fixture bathroom and 2 walk-in closets.
Two additional bedrooms and a study line the left side and the laundry room is located just inside from the 3-car garage.
Related Plan: Get a slightly alternate exterior with house plan 65701BS.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.