Name: Plan 801152PM: Two-Story 3-Bed Duplex with 777 Square Foot Lower Level Apartment
SKU: 801152PM
Price: 1070.0 USD
Availability: InStock

Plan 801152PM

Two-Story 3-Bed Duplex with 777 Square Foot Lower Level Apartment

Heated S.F.

2,331

Units

Width

Depth

Floor Plan

Main Level

2nd Floor

Lower Level (Unit 2: 777 Sq. Ft.)

Plan Details

This two-story duplex gives you a 3 bed, 1.5 bath two-floor unit (each floor is 777 square feet for a combined 1,564 square feet of living space) and a lower level one bed, one bath 777 square foot unit).
The lower unit can be used as a source of income or can host a family member as it is a one-bedroom apartment.
On the ground floor. a closed entry leads to an open-concept space with all the common areas as well as a powder room. The kitchen has a walk-in pantry. The bedrooms are on the second floor and share a bathroom that has both a shower and a bath. The master bedroom has a walk-in closet.
NOTE: Please allow 15 to 20 business days for plan delivery.

Unit A - Main Home

1,564Sq. Ft.

777 Sq. Ft.

1st Floor

777 Sq. Ft.

2nd Floor

3Beds

1Full Bath

1Half Bath

None

24'width

34'depth

34'height

Unit B - Lower Level

777Sq. Ft.

1Beds

1Full Bath

None

24'width

34'depth

What's Included

Please note this plan is designed to the National Building Code of Canada.

Exterior Elevations – Four detailed exterior elevations views showing the final appearance of each side of the house.
Foundation Plans – Different isometric views with dimensions as well as relevant information to build the foundation.
Floor Plans – A drawing of each floor of the house. They are fully dimensioned showing the size of rooms and the location and size of windows, doors and staircases.
Cross-Section View – Vertical section of the house showing the structure, insulation, typical wall configuration as well as other details
The plans include the 4 elevations views, foundation plans, floor plans, cross section, staircase section, materials specifications and various construction details which aid in the house's construction.
The plan views, cross sections and front elevations are drawn to the scale of 1/4" = 1'-0"; the side and rear elevations are 1/8" = 1'-0" and some details are 1/2" = 1'-0".
Lintel, beam, post, footing sizes, etc. are calculated (may require local architect/ engineer stamp) and the plans are available in metric.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required